| Operating Voltage: |
220/110 Volts AC |
| Operating Frequency: |
50 / 60 Hz |
| Operating Humidity: |
35 to 85% non-condensing |
| Operating Temperature: |
3 to 30 degrees celsius |
| Energy Source: |
Electrohydraulic |
| Principle: |
Under water spark gap discharge |
| |
|
| REFLECTOR PROPERTIES |
|
| Type: |
Dual focus ellipsoparabolied |
| Focal Size: |
4 X 12 mm |
| Penetration Depth: |
135 mm |
| Diameter: |
177 mm |
| Energy Range: |
12 to 22 KV |
| Angle of reflection: |
60 degrees (normal mode) |
| |
|
| PATIENT THERAPY TABLE |
|
| Dimension: |
1800 mm X 500 mm |
| Movement Up / Down: |
250 mm |
| Movement Left / Right: |
100 mm |
| Movement Head / Foot |
150 mm |
| Patient Weight Limit: |
200 kilograms |
| |
|
| SHOCK WAVE GENERATOR |
|
| Model: |
Vega III Ultra-Life |
| Energy Range: |
12 to 22 KV |
| Pressure Range: |
Up to 1400 bars |
| Energy Control: |
Variable in steps of 2 KV |
| Life Cycle: |
4 million shockwaves minimum |
| |
|
| CONTROL PANEL |
|
| Control: |
Coloured Touch Screen Interface |
| Shockwave Counter: |
Treatment and Cumulative |
| Trigger: |
Simulation (60 to 90 pulses/min.) |
| |
ECG R-Wave trigger |
| |
Respiration Exhale trigger |
| |
Enhanced multi-mode trigger |
| Foot Switch: |
Non-Electrical |
| |
|
| FLUOROSCOPY U-ARM |
|
| U-Arm rotation: |
0 to 30 degrees, motorised |
| Image Intensifier Size: |
150 mm (6 inches) |
| DQE: |
65% |
| Resolution: |
54 Lp/Cm |
| Contrast: |
30:1 |
| Voltage rating: |
40 to 110 kV |
| Current rating: |
5 mA |
| Focal Spot: |
0.5 mm |
| Anode RPM: |
Stationary Anode |
| Anode Heat Storage: |
45000HU |
| Target Angle: |
16 degrees |
| Monitor Size: |
17 inches |
| Monitor Type: |
TFT LCD |
